| KEYWORD |
PART NUMBER |
DESCRIPTION |
| |
| Bracket |
RA0-1185-000CN |
Left side fuser bracket (L-shaped) - |
| |
|
Provides mounting support for the fusing |
| |
|
assembly - Mounts to the upper rear |
| |
|
corner of the left side plate |
| |
| |
RA0-1186-000CN |
Right side fuser bracket (L-shaped) - |
| |
|
Provides mounting support for the fusing |
| |
|
assembly - Mounts to the upper rear |
| |
|
corner of the right side plate |
| |
| Bushing |
RA0-1104-000CN |
Roller bushing/retainer - Mounts on the |
| |
|
right end of the face-up output roller - |
| |
|
Also retains the shaft in the fusing |
| |
|
assembly |
| |
| Cable |
RG0-1074-000CN |
Cable assembly with ferrite - 4-pin (F) |
| |
|
connector on both ends - 35.7cm (14.1in) |
| |
|
long - From laser/scanner assembly to |
| |
|
formatter board |
| |
| |
RH2-5440-000CN |
Flex cable - Has two 10-pin (M) edge |
| |
|
connectors - 11.4cm (4.5in) long - From |
| |
|
laser/scanner assembly to formatter board |
| |
| Cable (Interface) |
8121-0712 |
Universal Serial Bus (USB) interface |
| |
|
cable - Type 'A' connector to type 'B' |
| |
|
connector - 0.6m (24-inches) long |
| |
| |
C2950A |
IEEE 1284 Bi-Tronics parallel cable - |
| |
|
DB-25 (M) connector (type A) to 36-pin |
| |
|
Centronics (M) connector (type B) - 2.0m |
| |
|
(6.6ft) long |
| |
| |
C2951A |
IEEE-1284 Bi-Tronics parallel cable - |
| |
|
DB-25 (M) connector (type A) to 36 pin |
| |
|
Centronics (M) connector (type B) - 3.0m |
| |
|
(9.8ft) long |
| |
| Cartridge |
C7115-60101 |
Ultra-Precise Black toner cartridge - |
| |
|
Will print approximately 2,500 pages - |
| |
|
For CREW fulfillment |
| |
| |
C7115A |
Ultraprecise black toner cartridge - Will |
| |
|
print approximately 2,500 pages based on |
| |
|
a 5% print density |
| |
| |
C7115X |
Ultraprecise black toner cartridge - Will |
| |
|
print approximately 3,500 pages based on |
| |
|
a 5% print density |
| |
| Clamp |
WT2-5694-000CN |
Snap-in cable clamp - Secures the drive |
| |
|
motor cable from the controller PC board |
| |
|
to the metal support pan |
| |
| Cleaning Supplies |
5090-3379 |
Toner cleaning cloth - Specially treated |
| |
|
cloth for absorbing toner (1 per package) |
| |
|
Ideal for clening up toner spills |
| |
| Control Panel |
RG0-1024-000CN |
Control panel assembly - Includes the |
| |
|
control button and indicator LED's |
| |
|
mounted on the left front cover support - |
| |
|
Mounts on the upper left corner of the |
| |
|
left side plate |
| |
| Cover |
RA0-1177-000CN |
Front cover - Lower front of printer - |
| |
|
With opening for inserting the paper |
| |
|
input tray assembly |
| |
| |
RA0-1178-000CN |
Right side cover assembly - Has molded-in |
| |
|
air intake louvers |
| |
| |
RA0-1179-000CN |
Left side printer cover - Covers the USB |
| |
|
and parallel port Connectors (On the |
| |
|
formatter board) |
| |
| |
RA0-1183-000CN |
Connector cover - Small rectangular |
| |
|
plastic cover - Mounts on top of the left |
| |
|
side cover - Covers the connector for the |
| |
|
optional copier/scanner if not installed |
| |
| |
RG0-1014-000CN |
Paper tray cover assembly - Includes |
| |
|
clear plastic cover with width adjustment |
| |
|
guides (Blue) for 'priority' paper input |
| |
| |
RG0-1016-000CN |
Rear cover assembly - Includes rear cover |
| |
|
and fold down face-up (or straight |
| |
|
through) paper output tray (Tray is NOT |
| |
|
sold separately) |
| |
| |
RG0-1017-020CN |
Top cover assembly - Has face-down paper |
| |
|
output tray molded into it - Mounts to |
| |
|
top of printer |
| |
| Door |
RG0-1015-000CN |
Toner cartridge door - Fold down door |
| |
|
used when accessing the toner cartridge - |
| |
|
Mounts to the top of the front cover |
| |
| Fan/Airflow Guide |
RG0-1030-000CN |
Fan and airflow guide assembly - Mounts |
| |
|
to the upper front on the right side |
| |
|
plate |
| |
| Film (Transparency) |
92296T |
LaserJet printer transparency film - A |
| |
|
size (8.5 x 11-inches) - 50 sheets per |
| |
|
box |
| |
| |
92296U |
LaserJet printer transparency film - A4 |
| |
|
size (21.0cm x 29.7cm) - 50 sheets per |
| |
|
box |
| |
| Foot |
RA0-1003-000CN |
Rubber foot - For bottom of printer - |
| |
|
Three used |
| |
| |
RA0-1197-000CN |
Rubber foot |
| |
| Fusing Assembly |
RG9-1493-060CN |
Fusing assembly (For 100V to 120V |
| |
|
operation) - Bonds the toner to the paper |
| |
|
with heat |
| |
| |
RG9-1494-000CN |
Fusing assembly ((For 220V to 240V |
| |
|
operation) - Bonds the toner to the paper |
| |
|
with heat - Mounts in the upper rear of |
| |
|
the printer |
| |
| Gear |
RA0-1088-000CN |
29 tooth gear - Mounts on the end of the |
| |
|
pressure roller - Largest of the three |
| |
|
gears on the fusing assembly |
| |
| |
RA0-1089-000CN |
17 tooth gear - Mounts on the end of the |
| |
|
face-up output roller - Center gear of |
| |
|
three gears on the fusing assembly |
| |
| |
RA0-1176-000CN |
69 tooth gear - Large gear with ribs and |
| |
|
six small holes - Mounts on on a rod in |
| |
|
the upper rear corner of the right side |
| |
|
plate |
| |
| Gear Assembly |
RA0-1172-000CN |
17 tooth gear assembly - Includes the 17 |
| |
|
tooth gear mounted on a black plastic |
| |
|
lever/bracket - Mounts to the right side |
| |
|
plate |
| |
| |
RG0-1020-000CN |
Gear/clutch assembly - Includes two gear |
| |
|
bodies and internal spring - Mounts on |
| |
|
the right end of the paper pickup shaft |
| |
| |
RY7-5081-000CN |
Gear/clutch assembly kit - Includes |
| |
|
double-gear body, shaft attachment piece |
| |
|
and spring - For driving the paper feed |
| |
|
roller |
| |
| Guide |
RA0-1181-000CN |
Guide - For the shutter lever on the |
| |
|
laser/scanner assembly - Mounts on the |
| |
|
metal support bracket for the |
| |
|
laser/scanner assembly |
| |
| |
RG0-1022-000CN |
Front guide assembly - Ribbed plastic |
| |
|
piece that runs the width of the printer |
| |
|
Mounts to the front of the left and |
| |
|
right side plates |
| |
| Interface |
J6035-61051 |
JetDirect 175X print server |
| |
| Laser/Scanner |
C7044-69001 |
Laser/scanner assembly - Mounts on top of |
| |
|
the print structure frame |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = RG9-1486-000CN) |
| |
| Lever |
RA0-1182-000CN |
Shutter lever - Spring loaded lever - |
| |
|
Mounts to the top of the laser/scanner |
| |
|
assembly |
| |
| Link |
RA0-1023-000CN |
Connecting link - Connects between the |
| |
|
sliding linkage on the left and right |
| |
|
side plates and the toner cartridge |
| |
|
access door (two used) |
| |
| Manual |
5851-1891 |
LaserJet quick reference service guide |
| |
|
(monochrome) - Volume IV - Covers the |
| |
|
LaserJet 1000,1100,1300,2300,3300mfp, |
| |
|
4100mfp,4200,4300,5000,5100,8150 |
| |
|
and 9000 series printers |
| |
| |
C7044-90906 |
LaserJet 1200 service manual - Printed |
| |
|
version (English) |
| |
| |
C7044-90923 |
Getting Started manual for LaserJet 1200 |
| |
|
Base model manual for North America and |
| |
|
Western Europe |
| |
| |
C7045-90916 |
Getting Started manual for LaserJet 1220 |
| |
|
- Manual for the copy/scan/print model - |
| |
|
North America and Western Europe |
| |
| |
C7048-90910 |
Getting Started manual for LaserJet 1200N |
| |
|
Network capable model manual for North |
| |
|
America and Western Europe |
| |
| Manual/Software |
C7044-60107 |
LaserJet 1200 series printers service and |
| |
|
support, documention and training on |
| |
|
CDROM |
| |
| Memory (DIMM) |
C7842-67901 |
8MB, 100-pin SDRAM DIMM memory module |
| |
| |
C7843-67901 |
16MB, 100-pin SDRAM DIMM memory module |
| |
| |
C7845-67901 |
32MB, 100-pin SDRAM DIMM memory module |
| |
| |
C7846-67901 |
64MB SDRAM - 100MHz synchronous DRAM - |
| |
|
DIMM package |
| |
| Memory (Product) |
C7842A |
8MB, 100-pin SDRAM DIMM memory module |
| |
| |
C7843A |
16MB, 100-pin SDRAM DIMM memory module |
| |
| |
C7845A |
32MB, 100-pin SDRAM DIMM memory module |
| |
| |
C9654AA |
64MB firmware ROM DIMM (Revision C) - |
| |
|
Current firmware for LaserJet 1200 series |
| |
| |
Q1887A |
64MB, 100-pin SDRAM DIMM memory module |
| |
| Motor |
RH7-1473-000CN |
Stepper motor assembly - Drives all |
| |
|
rollers and fusing assembly via the gear |
| |
|
train on the right side plate - Mounts on |
| |
|
the inside rear of the right side plate |
| |
| Nameplate/Logo |
7121-8042 |
HP logo (jewel) - For HP LaserJet series |
| |
|
printers - Mounts to the toner cartridge |
| |
|
door |
| |
| PC Board |
C7857-60001 |
Formatter PC board - Includes connectors |
| |
|
for the USB and parallel ports, and |
| |
|
optional copier/scanner - Mounts on the |
| |
|
left side plate |
| |
| |
RG0-1012-040CN |
Engine control PC board - Control and |
| |
|
power supply board for the printer (For |
| |
|
110V to 127V operation) - Mounts in the |
| |
|
bottom of the printer |
| |
| |
RG0-1029-000CN |
Engine control PC board - Control and |
| |
|
power supply board for the printer (For |
| |
|
220V to 240V operation) - Mounts in the |
| |
|
bottom of the printer |
| |
| Pad |
RF0-1014-000CN |
Separation pad assembly - Mounts on a |
| |
|
spring loaded arm in the paper pickup |
| |
|
assembly |
| |
| Pan |
RA0-1127-000CN |
Support pan (case) for the engine |
| |
|
controller PC board - Metal pan which |
| |
|
also acts as part of the bottom of the |
| |
|
printer |
| |
| Paper Pickup |
RG0-1003-000CN |
Paper pickup assembly - Includes the |
| |
|
pickup roller, feed roller assembly, |
| |
|
separation pad, plastic housing and other |
| |
|
associated parts - Does NOT include the |
| |
|
pickup roller |
| |
| Plate |
RG0-1001-040CN |
Right side plate assembly - Includes the |
| |
|
right side plate, drive motor, most all |
| |
|
drive gears, and cam levers - Does not |
| |
|
come with the pickup roller solenoid or |
| |
|
69 tooth gear |
| |
| |
RG0-1002-060CN |
Left plate assembly - Left side of |
| |
|
internal printer mechanism - Plate that |
| |
|
the formatter PC board mounts to |
| |
| |
RG0-1006-000CN |
Paper lift plate assembly - Plastic plate |
| |
|
assembly that includes the two blue paper |
| |
|
width adjusters - Mounts to the top front |
| |
|
of the paper pickup assembly |
| |
| Power Cord |
8120-6809 |
Power cord (Dove Gray) - 2.3m (7.5ft) |
| |
|
long - Has straight (F) receptacle (for |
| |
|
240V in the United Kingdom, Hong Kong, |
| |
|
Singapore, Malaysia) |
| |
| |
8120-6811 |
Power cord (Flint Gray) - 17 AWG, 2.3m |
| |
|
(7.5ft) long - Has straight (F) C13 |
| |
|
receptacle (for 220V in Europe, Saudi |
| |
|
Arabia, South Africa, India, and Korea) |
| |
| |
8120-6812 |
Power cord (Flint Gray) - 18 AWG, 2.3m |
| |
|
(7.5ft) long - Has straight (F) |
| |
|
receptacle (for 120V in the USA, Canada, |
| |
|
Mexico, Philippines, and Taiwan) |
| |
| |
8120-6813 |
Power cord (Flint Gray) - 17 AWG, 2.3m |
| |
|
(7.5ft) long - Has straight (F) |
| |
|
receptacle (for 220V in South Africa, |
| |
|
Saudi Arabia, and India) |
| |
| |
8120-6814 |
Power cord (Flint Gray) - 17 AWG, 2.3m |
| |
|
(7.5ft) long - Has straight (F) |
| |
|
receptacle (for 220V in Denmark) |
| |
| |
8120-6815 |
Power cord (Flint Gray) - 17 AWG, 2.3m |
| |
|
(7.5ft) long - Has straight (F) |
| |
|
receptacle (for 220V in Switzerland) |
| |
| Power Module |
0950-3169 |
Power supply module - 110-127V AC 57-63Hz |
| |
|
input - 13V DC output at 300mA (USA and |
| |
|
Canada) - For use with the J2592A |
| |
|
external JetDirect LAN interface module |
| |
| Protector |
Q1299A |
Sheet protectors - 0.1mm (4.0 mil) thick |
| |
|
polypropylene sheet protectors for 'A' |
| |
|
size (8.5-inches x 11-inches) documents - |
| |
|
Has top and side openings for easy |
| |
|
insertion and removal of documents - 50 |
| |
|
sleeves per box |
| |
| |
Q1299B |
Sheet protectors - 0.1mm (4.0 mil) thick |
| |
|
polypropylene sheet protectors for 'A4' |
| |
|
size (210mm x 297mm) documents - Has top |
| |
|
and side openings for easy insertion and |
| |
|
removal of documents - 50 sleeves per box |
| |
| Roller |
RF0-1003-000CN |
Face-up (straight through) output roller |
| |
|
Metal shaft with two rollers - Mounts |
| |
|
on the fusing assembly behind the |
| |
|
pressure roller |
| |
| |
RG9-1483-000CN |
Transfer roller assembly - Transfers |
| |
|
static charge to the media being printed |
| |
|
on - Mounts in the top rear of the paper |
| |
|
pickup assembly |
| |
| |
RL1-0303-000CN |
Paper pickup roller (D-shaped roller) - |
| |
|
Picks up media from the paper input tray |
| |
|
Clips in the holder on the paper pickup |
| |
|
shaft |
| |
| Roller Assembly |
RG0-1010-000CN |
Output roller assembly - Includes |
| |
|
face-down delivery roller, four |
| |
|
spring-loaded pressure rollers, support |
| |
|
frame, and drive gear - Delivers printed |
| |
|
pages to the output tray on top of the |
| |
|
printer - Mounts on the top rear of the |
| |
|
fusing assembly |
| |
| Roller/Holder |
RG0-1005-000CN |
Paper feed roller assembly - Includes |
| |
|
feed roller, feed roller base assembly, |
| |
|
retainer bushings, paper input leading |
| |
|
edge sensor, sensor flag and spring |
| |
| Scanner |
C7045-69001 |
Copier/scanner assembly |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = R37-5020-000CN) |
| |
| Screw |
RY7-5082-000CN |
Screw kit - Includes nine bags of |
| |
|
different size screws - This is a |
| |
|
complete set of screws for the LaserJet |
| |
|
1000 and 1200 series printers |
| |
| Sensor |
RG0-1072-000CN |
Paper sensor PC board - Small board with |
| |
|
optical flag sensor (Flag not included) - |
| |
|
For sensing leading edge of paper - |
| |
|
Mounts on the paper feed assembly in the |
| |
|
paper pickup assembly |
| |
| |
RG0-1082-000CN |
Delivery sensor PC board - Small board |
| |
|
with optical flag sensor (Flag not |
| |
|
included) - For sensing paper output - |
| |
|
Mounts on the bottom center of the fusing |
| |
|
assembly |
| |
| Separator |
RY7-5055-000CN |
Scanner separation pad kit - Kit includes |
| |
|
separation pad, separation backing pad |
| |
|
and separation pad holder |
| |
| Service Kit |
RG9-1519-000CN |
Anti-curl kit - Used to help correct |
| |
|
paper curling at output problems usually |
| |
|
caused by too high humidity or wrong |
| |
|
media - Kit contains two Mylar fingers |
| |
|
and installation instructions |
| |
| Shaft |
RG0-1007-020CN |
Paper pickup shaft assembly - Includes |
| |
|
the shaft, the two cams, pickup roller |
| |
|
holder, and end cap - Mounts in the paper |
| |
|
pickup assembly |
| |
| Shield |
C7044-00001 |
RFI shield - Metal plate that covers the |
| |
|
formatter board - Mounts on the left side |
| |
|
plate |
| |
| Solenoid |
RH7-5284-000CN |
24V DC Solenoid - Engages the pickup |
| |
|
roller gear/clutch assembly - Mounts on |
| |
|
the right side plate |
| |
| Spacer |
RA0-1128-000CN |
Printed circuit board spacer - Mounts |
| |
|
between the engine control PC board and |
| |
|
the metal support pan (six used) |
| |
| Spring |
RA0-1035-000CN |
Torsion spring - Provides high voltage |
| |
|
connection to the toner cartridge |
| |
|
(developing cylinder) - Mounts between |
| |
|
the paper pickup roller and the transfer |
| |
|
roller on the left side of the paper |
| |
|
pickup assembly |
| |
| |
RA0-1169-000CN |
Compression spring - Provides tension for |
| |
|
the shutter lever - Mounts between the |
| |
|
shutter lever and the laser/scanner |
| |
|
assembly |
| |
| |
RA0-1175-000CN |
Tension spring - Provides tension for |
| |
|
lever - Mounts on the lower front on the |
| |
|
right side plate |
| |
| |
RA0-1200-000CN |
Torsion spring - Provides high voltage |
| |
|
connection to the toner cartridge |
| |
|
(primary charging roller) - Mounts behind |
| |
|
the transfer roller on the left side of |
| |
|
the paper pickup assembly |
| |
| Support |
RA0-1173-000CN |
Mounting support - Metal piece that |
| |
|
supports the paper pickup solenoid |
| |
|
(SL001) - Mounts on the right side plate |
| |
| |
RA0-1184-000CN |
Right side cover mounting support - Front |
| |
|
cover support - Mounts on the upper right |
| |
|
corner of the right side plate |
| |
| Tray |
RG0-1013-000CN |
Printer input paper tray assembly - |
| |
|
Includes bottom tray, blue paper length |
| |
|
adjustment lever, and extension arm (Does |
| |
|
NOT include the paper tray cover) |
| |
| |
RG0-1069-000CN |
Pickup tray assembly - Paper input tray |
| |
|
for the optional copier/scanner assembly |
| |
| |
RG0-1070-000CN |
Face-down tray assembly - Paper output |
| |
|
tray for the optional copier/scanner |
| |
|
assembly |
Login Here
