| |
HP
Laserjet 8000, 8100, and 8150 Series service mode |
1) |
Hold down SELECT and JOB CANCEL while powering
on the printer, until all lights are illuminated and the Display is blank.
(If the Display Panel reads INTERNAL TEST at this point, the keys were
released too soon. Repeat this step until successful.)
|
2) |
Press
MENU RIGHT, then SELECT. The message SERVICE MODE is displayed briefly,
then the printer automatically begins initialization. After several seconds,
both Control Panel Indicators turn off. (The printer may display WARMING
UP if it has not warmed up completely.) After the printer has warmed up
and passed the self test, SERVICE MODE is displayed. |
3) |
Press
MENU once to display SERVICE MENU. |
4) |
Once
it says SERVICE MENU press ITEM to scroll through service mode items.
To exit the Service Mode press GO. |
| |
HP
Laserjet 5si service mode |
1) |
Hold
down [Items] and [+] while powering ON the printer, until all lights are
illuminated and the Display is blank. (If the Display Panel reads INTERNAL
TEST at this point, the keys were released too soon. Repeat this step
until successful.) |
2) |
Press
[Select]. The message SERVICE MODE is displayed briefly, then the printer
automatically begins an INTERNAL TEST. After several seconds, both Control
Panel Indicators turn OFF. (The printer may display WARMING UP if it has
not warmed up completely.) After the printer has warmed up and passed
the self test, SERVICE MODE is displayed. |
3) |
Press
[Menus] once to display SERVICE MENU. |
4) |
Once
it says SERVICE MENU press ITEM to scroll through service mode items.
To exit the Service Mode press [On Line]. |
| |
HP
Laserjet 4V and 4MV service mode |
1) |
Hold
down the [On Line], [Form Feed], and [Enter] keys while powering ON the
printer, until all lights are illuminated and the Display Window is blank.
(If the Display Window reads 05 SELF TEST at this point, the keys were
released too soon. Repeat this step until successful.) |
2) |
Press
the [Form Feed] key, then the [Enter] key. The message SERVICE MODE is
displayed briefly, then the printer automatically begins a 05 SELF TEST.
After several seconds, both Control Panel Indicators turn OFF. (The printer
may display 02 WARMING UP if it has not warmed up completely.) After the
printer has warmed up and passed the self test, SERVICE MODE is displayed. |
3) |
Press
[Menus] once to display SERVICE MENU. |
4) |
Once
it says SERVICE MENU press ITEM to scroll through service mode items.
To exit the Service Mode press the [On Line] key. |
| |
HP
Laserjet 5000 series service mode |
1) |
Hold
down [Select] and [Cancel Job] while turning on the printer. (If the control
panel reads INITIALIZING, the keys were released too soon.) |
2) |
Press
the right side of the [Menu] key, then press [Select]. The message SERVICE
MODE is displayed. |
3) |
Press
[Menus] once to display SERVICE MENU. |
4) |
Once
it says SERVICE MENU press ITEM to scroll through service mode items.
To exit the Service Mode press [Go]. |
| |
HP
Laserjet 4100 series service mode |
1) |
While
turning on the printer, hold down SELECT and CANCEL JOB until all of the
lights on the control panel are lit.
Note: If READY appears in the control panel, the keys might have been
released too soon, or the wrong keys were pressed. |
2) |
Press
the right side of the MENU key, then press SELECT. The message SERVICE
MODE temporarily appears and will reappear when the printer completes
the initialization process. |
3) |
Press
[Menus] once to display SERVICE MENU. |
4) |
Once
it says SERVICE MENU press ITEM to scroll through service mode items. |
5) |
Once
it says SERVICE MENU press ITEM to scroll through service mode items. |
| |
HP
Laserjet 4000 and 4050 series service mode |
1) |
Hold
down [Select] and [Cancel Job] while turning on the printer until all
of the lights on the Control Panel are lit. (If the Control Panel reads
INITIALIZING, the keys were released too soon.) |
2) |
Press
the right side of the [Menu] key, then press [Select]. The message SERVICE
MODE is displayed. |
3) |
Press
[Menus] once to display SERVICE MENU. |
4) |
Once
it says SERVICE MENU press ITEM to scroll through service mode items. |
5) |
To
exit the Service Mode press [Go]. |
| |
HP
Laserjet 4 and 4 plus series service mode |
1) |
Hold
down the [On Line], [Form Feed], and [Enter] keys while powering ON the
printer, until the ON LINE and FORM FEED indicators are both illuminated
and the Display Window is blank. (If the Display Window reads 05 SELF
TEST at this point, the keys were released too soon. Repeat this step
until successful.) |
2) |
Press
the [Form Feed] key, then the [Enter] key. The message SERVICE MODE is
displayed briefly, then the printer automatically begins a 05 SELF TEST.
After several seconds, the ON LINE and FORM FEED lights turn OFF. (The
printer may display 02 WARMING UP if it has not warmed up completely.)
After the printer has warmed up and passed the self test, SERVICE MODE
is displayed. |
3) |
Press
[Menus] once to display SERVICE MENU. |
4) |
Once
it says SERVICE MENU press ITEM to scroll through service mode items. |
5) |
To
exit the Service Mode press the [On Line] key. |
| |
HP
Laserjet 5 series service mode |
1) |
Hold
down the Menu+ and Value+ keys while powering on the printer. Hold the
keys down until SERVICE MODE is displayed. |
2) |
The
interrupted power-on self test is resumed. If the test completes successfully,
the message SERVICE MODE is displayed.. |
3) |
To
exit service mode, press the Go button. |
| |
Laserjets
5P, 6P, 2100, 2200 and other printers |
1) |
These
printers do not have a display panel (LEDs only).
These models are designed as low volume personal printers and do not have
a maintenance count that needs to be reset or a readily accessible service
mode. You can cold reset these printers or completely reinitialize the
NVRAM (nonvolatile random access memory) to factory defaults. Cold resetting
will reset most of the system parameters to factory defaults and reinitializing
the NVRAM will reset ALL system parameters to the factory defaults. Also,
there is a service mode for these printers but it is only accessible through
software using PJL service mode commands. Buy the printer's service manual
if you want to learn more. |
| |
HP
Laserjet 5L, 6L, 1100, 1200 |
1) |
These
printers do not have a service mode.
You can only perform a cold-reset and continuous self-test. |
Login Here
