| |
| Arm |
RA2-2484-000CN |
Bin full sensor arm - Attached to Face Up |
| |
|
bin sensor flag |
| |
| |
RB1-6417-000CN |
Registration paper sensor arm - Senses |
| |
|
paper in registration assembly |
| |
| |
RB1-6444-000CN |
Release arm - Front toner cartridge |
| |
|
release arm - Hook shaped cartridge |
| |
|
holder - Left side of toner cartridge |
| |
|
guide slot |
| |
| |
RB1-6446-000CN |
Release arm - Toner cartridge release arm |
| |
|
Hook shaped cartridge holder - Toner |
| |
|
cartridge release arm - Hook shaped |
| |
|
cartridge holder - Right side toner |
| |
|
cartridge guide slot |
| |
| |
RB1-6557-000CN |
Paper input unit sensor arm - Senses when |
| |
|
paper passes through paper input unit |
| |
| Attachment Kit |
C4785-60516 |
Attachment kit - Attachment rod, bracket |
| |
|
and cables |
| |
| Bed |
C3766-60503 |
Stapling unit bed assembly - Includes |
| |
|
sliders that move sheets of paper to |
| |
|
stapling position |
| |
| Bin |
C3764-60505 |
Face-up paper output bin |
| |
| |
C4783-69502 |
Face down bin assembly - One roller - Odd |
| |
|
face-down bin assembly |
| |
| |
C4785-60502 |
Face-down paper output bin - Smaller of |
| |
|
the two types of trays |
| |
| |
RG1-3837-000CN |
Face down bin assembly - Two rollers - |
| |
|
Even face-down bin assembly |
| |
| Brush |
C3766-60508 |
Stapling unit antistatic brush - |
| |
|
Eliminates static charge on paper |
| |
| Bushing |
RA2-2505-000CN |
Output bin roller bushing |
| |
| |
RB1-6441-000CN |
Transfer guide bushing - Transfer guide |
| |
|
bushing - Mounted on transfer roller - |
| |
|
Two used |
| |
| |
RS5-1399-000CN |
Drive bushing - Paper deck drive assembly |
| |
|
bushing |
| |
| Cable |
C4787-60507 |
Stapler unit C-link cable - Has two high |
| |
|
density 15-pin (M) connectors - 91.4cm |
| |
|
(36in) long - From multibin mailbox to |
| |
|
stapler unit |
| |
| |
RG5-1843-000CN |
Paper sensor cable - J11 to J15 |
| |
| |
RG5-1850-000CN |
Duplexer cable assembly - From duplexer |
| |
|
to DC controller |
| |
| |
RG5-1859-000CN |
Sensor cable - PIU PS2 sensor cable - J13 |
| |
|
to J1205 |
| |
| |
RG5-1861-000CN |
Cable assembly - 20-pin (F) connector on |
| |
|
each end - 39.4cm (15.5in) long - Sensor |
| |
|
cable - PIU paper sensor cable - J1201 to |
| |
|
J219 |
| |
| |
RG5-1920-000CN |
Cassette size sensor cable - Between |
| |
|
cassette size sensor PCA's and formatter |
| |
|
board |
| |
| |
RG5-1921-000CN |
Fan cable - Fan 3 power cable |
| |
| |
RG5-1928-000CN |
Registration cable assembly - Includes 7P |
| |
|
and 3P connectors |
| |
| |
RG5-3909-000CN |
Power supply cable - Between power supply |
| |
|
and controller PCA |
| |
| |
RG5-3919-000CN |
Main cable - Largest cable in C4781A |
| |
| |
RG5-4377-000CN |
Cable assembly - An 11-pin (F) connector, |
| |
|
a 10-pin (F) connector, and two 7-pin (F) |
| |
|
connectors - 1.1m (3.7ft) long - Laser |
| |
|
and control panel cable |
| |
| |
RG5-4378-000CN |
Cable assembly with ferrites - Has many |
| |
|
connectors: a 14-pin (F), an 11-pin (F), |
| |
|
two 7-pin (F), a 5-pin (F), two 4-pin |
| |
|
(F), and two 3-pin (F) - 85.6cm (33.7in) |
| |
|
long - Scanner motor cable |
| |
| |
RG5-4381-000CN |
Cable assembly - 18-pin (F) connector to |
| |
|
25.4cm (10in) grounding wire with ring |
| |
|
terminal, 35.7cm (14in) cable with 4-pin |
| |
|
(F) connector, 53.3cm (21in) cable with |
| |
|
1-pin (F) connector, and 86.4cm (34in) |
| |
|
cable with 4-pin (F) connector - Fuser |
| |
|
cable 1 |
| |
| |
RG5-4386-000CN |
Cable assembly - From DC controller board |
| |
|
to main motor |
| |
| Cable (Interface) |
5063-1254 |
IEEE 1284 Bi-Tronics parallel cable - |
| |
|
DB-25 (M) connector (type A) to 36-pin |
| |
|
high density IEEE 1284C (M) connector |
| |
|
(type C) - 3.0m (9.8ft) long - Connects |
| |
|
to HP Vectra and IBM PC/AT/XT compatibles |
| |
| |
5063-1255 |
IEEE 1284 Bi-Tronics parallel cable - |
| |
|
DB-25 (M) connector (type A) to 36-pin |
| |
|
high density IEEE 1284C (M) connector |
| |
|
(type C) - 10m (33ft) long - Connects to |
| |
|
HP Vectra and IBM PC/AT/XT compatibles |
| |
| |
92215N |
Interface cable kit - For HP peripherals |
| |
|
designed for use in an AppleTalk/Phonenet |
| |
|
network - Not for Macintosh models that |
| |
|
have recessed I/O connectors - Will also |
| |
|
need kit for Macintosh |
| |
| |
92215S |
RS-422 serial cable - 8-pin (M) to 8-pin |
| |
|
(M) - 2.0m (6.6ft) long - For connecting |
| |
|
Apple Macintosh with LocalTalk/serial |
| |
|
connector |
| |
| |
C2946A |
IEEE-1284 Bi-Tronics parallel cable - |
| |
|
DB-25 (M) connector (type A) to 36 pin |
| |
|
high density IEEE-1284C (M) connector |
| |
|
(type C) - 3.0m (9.8ft) long |
| |
| |
C2947A |
IEEE 1284 Bi-Tronics parallel cable - |
| |
|
DB-25 (M) connector (type A) to 36-pin |
| |
|
high density IEEE 1284C (M) connector |
| |
|
(type C) - 10m (33ft) long |
| |
| |
C4781-60504 |
Multi-Bin mailbox interface C-link cable |
| |
|
- 45cm (17.7-in) long - From printer to |
| |
|
Multi-Bin Mailbox or to Tray 4 and 5 |
| |
| Cable Kit |
C4785-60520 |
Cable kit - Includes interlock switch, |
| |
|
head motor cable, flipper sensor, |
| |
|
encoder, motor controller cables, ESD |
| |
|
cable, and delivery head assembly flat |
| |
|
cable |
| |
| Cartridge |
5184-5208 |
Black Ultra-Precise toner cartridge |
| |
| |
C4182X |
Black Ultra-Precise toner cartridge |
| |
| Caster |
C4785-60510 |
Fixed caster - Non-adjustable height |
| |
|
caster |
| |
| |
C4785-60511 |
Fixed caster - Adjustable height caster |
| |
| |
XZ9-0442-000CN |
Caster wheel - (Four used) |
| |
| Certificate |
C7819-90903 |
Email license certificate for MFP |
| |
| |
C8539-90901 |
FAX license certificate for MFP |
| |
| |
C9122-90901 |
NT authentication certificate for MFP |
| |
| Cleaning Supplies |
5090-3379 |
Toner cleaning cloth - Specially treated |
| |
|
cloth for absorbing toner (1 per package) |
| |
|
Ideal for clening up Toner spills |
| |
| Clip |
C4785-60512 |
Multibin mailbox attachment clip - |
| |
|
Attachment clip - Attaches multibin |
| |
|
mailbox to printer |
| |
| |
RB2-3636-000CN |
Tray lock clip - At rear of top output |
| |
|
tray - Tray lock clip - Plastic clip at |
| |
|
rear of top output tray |
| |
| Clutch |
RG5-4308-000CN |
Registration assembly clutch - Attached |
| |
|
to right side of registration assembly |
| |
| |
RH7-5188-000CN |
Paper feed clutch - On right side of |
| |
|
paper input unit |
| |
| Control Panel |
RG5-5268-000CN |
Control panel - Includes display |
| |
| Cover |
5021-0349 |
EIO slot cover - Installs on formatter |
| |
|
boards without JetDirect PCA |
| |
| |
C3764-60555 |
Top cover - For Multi-Bin Mailbox |
| |
| |
C3766-60501 |
Stapling unit top cover |
| |
| |
C4785-60503 |
Blind cover - Covers space trays and |
| |
|
face-up bin - Home position cover for |
| |
|
head assembly |
| |
| |
C4785-60504 |
Front cover - Front side cover |
| |
| |
C4785-60505 |
Side cover - Back side cover |
| |
| |
RA2-2531-000CN |
Release latch handle cover |
| |
| |
RB1-6464-000CN |
Upper right side cover - Above drop down |
| |
|
tray 1 |
| |
| |
RB1-6480-000CN |
Lower Left Cover - Mounted below diverter |
| |
|
door assembly |
| |
| |
RB1-6489-000CN |
AC access cover - Has cut out for A/C |
| |
|
power cord connection |
| |
| |
RB1-6492-000CN |
Power switch cover - Has cutout for power |
| |
|
switch |
| |
| |
RB1-7832-020CN |
2000 sheet paper tray right side cover |
| |
| |
RB2-2509-000CN |
Clutch cover for 2000 sheet input tray |
| |
| |
RB2-2519-000CN |
Back cover - Protects back of tray |
| |
|
assembly |
| |
| |
RB2-3631-000CN |
Paper feed clutch cover |
| |
| |
RB2-3642-000CN |
Right rear cover - Attaches to the sheet |
| |
|
metal rear cover |
| |
| |
RB2-3666-000CN |
Right side cabinet cover |
| |
| |
RB2-3668-000CN |
Paper storage tray front cover |
| |
| |
RB2-3675-000CN |
Back cover - Protects back of tray |
| |
|
assembly |
| |
| |
RF1-4004-000CN |
Front cover - Cover with release latch |
| |
|
handle |
| |
| |
RF1-4008-000CN |
Back cover - For 7-bin table top mailbox |
| |
| |
RF5-1402-000CN |
Rear cover - Sheet metal |
| |
| |
RF5-2568-000CN |
Front cover - Contains LED status display |
| |
|
window |
| |
| |
RF5-2644-000CN |
Paper tray top cover - Includes label |
| |
| |
RF5-2646-000CN |
Left cover - Left side cabinet cover |
| |
| |
RF5-2762-000CN |
Front top cover - Cover where the |
| |
|
'Status' LED is located |
| |
| |
RF5-2764-000CN |
Left cover - Left side cabinet cover |
| |
| |
RF5-2766-000CN |
Paper tray top cover - Includes label |
| |
| |
RG1-3838-000CN |
Top cover assembly - Upper guide |
| |
| |
RG1-3840-000CN |
Right cover - Right side cover below the |
| |
|
diverter assembly |
| |
| |
RG5-4360-000CN |
Top cover assembly - Does NOT include |
| |
|
face up tray or control panel display |
| |
| |
RG5-4362-000CN |
Front cover - Front access door mounts to |
| |
|
this cover |
| |
| Delivery |
RG5-1874-110CN |
Face down delivery assembly - Feeds paper |
| |
|
to top of printer |
| |
| Diverter |
RG1-3844-000CN |
Diverter assembly - Flipper |
| |
| |
RG5-4325-000CN |
Diverter assembly - Diverts paper to |
| |
|
duplexer assembly or face up tray or face |
| |
|
down delivery assembly |
| |
| Door |
RB2-3558-000CN |
Diverter door assembly - Upper door on |
| |
|
left side of printer - Two struts are |
| |
|
mounted to door |
| |
| |
RB2-3626-000CN |
Front access door - Duplexer jam removal |
| |
|
access door |
| |
| |
RG5-1915-040CN |
Right door assembly - Door below paper |
| |
|
tray 1 - Support strap attached to right |
| |
|
side |
| |
| Drive |
C2985-61021 |
20GB EIO hard drive - LaserJet EIO |
| |
|
font/print job storage - Used as |
| |
|
replacement for 2.1GB and 3.2GB drives |
| |
|
when used in a LaserJet |
| |
| Drive (Product) |
C2985A |
2.1GB hard drive - LaserJet EIO |
| |
|
font/print job storage |
| |
| |
C2985B |
3.2GB hard drive - DesignJet or LaserJet |
| |
|
EIO font/print job storage |
| |
| Drive Assembly |
RF9-1249-000CN |
Diverter drive assembly - Four gear drive |
| |
|
assembly - 20-tooth gear NOT included |
| |
| |
RG5-3851-000CN |
Paper deck drive assembly - Gear assembly |
| |
|
that lifts the paper plate to the pickup |
| |
|
roller |
| |
| |
RG5-4365-000CN |
Main drive gear assembly - Driven by main |
| |
|
motor - Mounted on rear of chassis |
| |
| |
RG5-4416-000CN |
Paper deck drive assembly - Gear assembly |
| |
|
that lifts the paper plate to the pickup |
| |
|
roller |
| |
| Duplexer |
C4782-69501 |
Duplexer assembly - For two sided |
| |
|
printing capability |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = C4782-60501) |
| |
| |
C4782A |
Auto duplexer assembly - Provides double |
| |
|
sided printing capability on laserJets |
| |
|
8100, 8500, 8000, and 5Si |
| |
| Envelope Feeder |
C3765-69501 |
Replacement optional envelope feeder - |
| |
|
Holds 100 envelopes |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = C3765-60501) |
| |
| |
C3765B |
Optional envelope feeder - Automatically |
| |
|
feeds 100 envelopes |
| |
| Extension |
C4785-60531 |
C-link cable adapter extension - Used |
| |
|
when no input device is used with 8-bin |
| |
|
or 5-bin mailbox |
| |
| Fan |
RH7-1266-000CN |
Tubeaxial fan - (FM2) - For the low |
| |
|
voltage power supply |
| |
| |
RH7-1271-000CN |
Tubeaxial fan - (FM3) - For the formatter |
| |
|
board cooling - Mounts on the rear of the |
| |
|
chassis |
| |
| |
RH7-1289-000CN |
Tubeaxial fan - (FM4) - Mounts on the |
| |
|
rear of the face down delivery assembly |
| |
| |
RH7-1396-000CN |
Tubeaxial fan (low profile) - (FM1) - for |
| |
|
the laser/scanner assembly power supply |
| |
| |
RH7-1397-000CN |
Tubeaxial fan - (FM5) - Mounts in the |
| |
|
tray 1 paper pickup assembly |
| |
| Feed Assembly |
C4780-69503 |
Paper feed assembly - Vertical transfer |
| |
|
unit - Transfers paper from pickup |
| |
|
assembly up to the printer input - Use |
| |
|
with 2x500 tray |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = RG5-4403-000CN) |
| |
| |
C4781-69510 |
Paper feed assembly - Vertical transfer |
| |
|
unit - Transfers paper from pickup |
| |
|
assembly up to the printer input - Use |
| |
|
with 2000 sheet tray |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = RG5-3854-000CN) |
| |
| |
RG5-4305-000CN |
Feeder assembly - Transfer roller and |
| |
|
registration assembly are mounted on this |
| |
|
assembly - Mounted on upper right side of |
| |
|
chassis |
| |
| Film (Transparency) |
92296U |
LaserJet printer transparency film - A4 |
| |
|
size (21.0cm x 29.7cm) - 50 sheets per |
| |
|
box |
| |
| |
92296T |
LaserJet printer transparency film - A |
| |
|
size (8.5 x 11-inches) - 50 sheets per |
| |
|
box |
| |
| Firmware |
C4214-60009 |
Firmware ROM |
| |
| Flag |
RA2-2485-000CN |
Sensor flag - Optical sensor for bin full |
| |
|
sensor |
| |
| Flipper |
Q5693-67921 |
Flipper assembly (with cable) - Moves |
| |
|
paper from printer to face down mailbox |
| |
|
tray or the face up bin on top - Includes |
| |
|
firmware chip |
| |
| Foot |
RB1-6421-000CN |
Chassis foot - Support for right side of |
| |
|
printer chassis - Two used |
| |
| |
RG5-3853-000CN |
Adjustable foot - Threaded attachment for |
| |
|
leveling |
| |
| |
RG5-4203-000CN |
Outrigger adjustable foot - Adjusts up |
| |
|
and down |
| |
| |
RG5-4205-000CN |
Cabinet stabilizer (outrigger) - With |
| |
|
adjustable foot |
| |
| Fuse |
VD5-0056-301CN |
Low voltage power supply fuse - For |
| |
|
110/120V operation |
| |
| |
VD7-0646-301CN |
Low voltage power supply fuse - For |
| |
|
220/240V operation |
| |
| |
VD7-1893-151CN |
Power supply fuse, 250V max - Power |
| |
|
supply fuse |
| |
| Fusing Assembly |
C4265-69004 |
Fusing assembly (For 100V to 120V |
| |
|
operation) - Bonds toner to paper with |
| |
|
heat |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = RG5-6532-010CN) |
| |
| |
C4265-69005 |
Fusing assembly (For 220V to 240V |
| |
|
operation) - Bonds toner to paper with |
| |
|
heat |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = RG5-6533-010CN) |
| |
| Guard |
RB2-3641-000CN |
Hinge plate - Bottom half of top cover |
| |
|
hinge |
| |
| Guide |
C3764-60561 |
Paper input guide |
| |
| |
C3766-60507 |
Paper exit guide (Wire-form) - Mounts in |
| |
|
the paper exit of the stapling unit |
| |
| |
RB1-6771-000CN |
PCA guide - Formatter board support |
| |
|
guides |
| |
| |
RB1-6775-000CN |
Slide guide - Guide for formatter PCA |
| |
| |
RB1-6776-000CN |
Tray rail guide (Spring loaded metal |
| |
|
guide) - Support for tray 2 and 3 - |
| |
|
Mounts on the right side of the internal |
| |
|
chassis |
| |
| |
RB2-3622-000CN |
Toner cartridge guide - Plastic piece |
| |
|
with slot to guide toner cartridge |
| |
| |
RF5-1484-000CN |
Paper size guide/stop - For upper or |
| |
|
lower paper input tray |
| |
| |
RF5-2676-000CN |
Transfer guide - Mounting bracket for the |
| |
|
transfer roller - Mounts to the top of |
| |
|
the feed guide assembly |
| |
| |
RG5-4364-000CN |
Toner cartridge guide - Rear guide - |
| |
|
Plastic piece with slot to guide toner |
| |
|
cartridge |
| |
| Handle |
RA2-2512-000CN |
Release handle - Latch lever handle |
| |
| Hardware Kit |
C4785-60519 |
Plastic parts kit - Contains paper |
| |
|
anticurl spring/strings, small bottom |
| |
|
pulley, flat cable holder, edge and |
| |
|
gasket |
| |
| Head Assembly |
C4785-60523 |
Head assembly - Moves paper up and down |
| |
|
the mailbox to the correct mailbox bin |
| |
| Heater |
RH7-4126-000CN |
Heater element for fusing assembly - 120V |
| |
| Hinge |
C3766-60506 |
Stapling unit hinges - Set of 2 |
| |
| Holder |
RB1-6461-000CN |
Damper holder - Front damper holder |
| |
| |
RB1-6462-000CN |
Damper holder - Rear damper holder |
| |
| Interface (Product) |
J3110A |
Ethernet 10Base-T (RJ-45) EIO network |
| |
|
internal print server PC board - Ethernet |
| |
|
10Base-T (RJ-45) EIO Network PCA |
| |
| |
J3111A |
Ethernet 10Base-T/10Base2 and LocalTalk |
| |
|
(RJ-45, BNC, LocalTalk) EIO network PCA - |
| |
|
Ethernet 10Base-T/10Base2 & LocalTalk |
| |
|
(RJ-45, BNC, LocalTalk) EIO Network PCA |
| |
| |
J3112A |
JetDirect 600N token ring LAN interface |
| |
|
board - DB-9 and RJ-45 connectors |
| |
| |
J3113A |
JetDirect 600N internal print server |
| |
|
(10Base-T and 100Base-TX) LAN interface |
| |
|
board - Plugs into peripheral EIO slot |
| |
| |
J4135A |
JetDirect connectivity card - Has one USB |
| |
|
port, one serial (DB9) port, and one |
| |
|
LocalTalk port - Plugs in one of the EIO |
| |
|
slots on selected DesignJet and LaserJet |
| |
|
printers |
| |
| |
J4167A |
JetDirect 610N token ring LAN interface |
| |
|
board - DB-9 and RJ-45 connectors |
| |
| |
J4169A |
JetDirect 610N internal print server |
| |
|
(10Base-T and 100Base-TX) LAN interface |
| |
|
board - Plugs into peripheral EIO slot - |
| |
|
Has a RJ-45 connector - Comes with |
| |
|
software on CD-ROM and manual |
| |
| |
J6057A |
JetDirect 615N internal print server LAN |
| |
|
interface board - 10Base-T and 100Base-TX |
| |
|
Plugs into peripheral EIO slot, has |
| |
|
RJ-45 connector - Includes software on |
| |
|
CD-ROM and manual |
| |
| |
J6057AR |
JetDirect 615N internal print server |
| |
|
(10Base-T and 100Base-TX) LAN interface |
| |
|
board - Plugs into peripheral EIO slot - |
| |
|
Has a RJ-45 connector - Comes with |
| |
|
software on CD-ROM and manual |
| |
| LED |
C4785-60515 |
Status LED display - With cable |
| |
| Label |
92296E |
LaserJet printer shipping labels - 8.47cm |
| |
|
(3.33in) x 10.2cm (4.00in) labels - Six |
| |
|
per sheet - 100 sheets per box |
| |
| |
92296F |
LaserJet printer return address labels - |
| |
|
1.27cm (0.50in) x 4.45cm (1.75in) labels |
| |
|
- 80 per sheet - 25 sheets per box |
| |
| |
92296G |
LaserJet printer file folder labels - |
| |
|
1.69cm (0.67in) x 8.73cm (3.44in) labels |
| |
|
- 30 per sheet - 25 sheets per box |
| |
| |
92296H |
LaserJet printer labels for 3.5-inch |
| |
|
diskettes - 7.00cm (2.75in) x 7.00cm |
| |
|
(2.75in) labels - Nine per sheet - 70 |
| |
|
sheets per box |
| |
| |
92296J |
LaserJet printer labels for 5.25-inch |
| |
|
diskettes - 3.81cm (1.50in) x 10.2cm |
| |
|
(4.00in) labels - 12 per sheet - 70 |
| |
|
sheets per box |
| |
| |
92296K |
LaserJet printer full sheet label - A |
| |
|
size (8.5 x 11-inches) label - One per |
| |
|
sheet - 100 sheets per box |
| |
| |
RB2-5342-000CN |
2000 sheet paper tray cassette size label |
| |
|
- C4781A paper tray cassette size label - |
| |
|
All three sizes |
| |
| |
RS5-8676-000CN |
Operation label |
| |
| Laser/Scanner |
C4214-69003 |
Laser/scanner assembly |
| |
| Latch |
XZ9-0379-000CN |
Door latch insert (Black) - Door latch |
| |
|
(Black) - For front access door |
| |
| Lever |
RB1-6692-000CN |
Paper sensing lever - Senses paper in |
| |
|
face down delivery assembly |
| |
| |
RB1-6693-020CN |
Paper height lever - Senses when |
| |
|
face-down tray is full |
| |
| Lock |
C4787-60503 |
Shipping lock kit - For 8-bin and 5-bin |
| |
|
mailboxes |
| |
| |
RB1-6615-020CN |
Right fusing assembly lock - Locks fuser |
| |
|
in place |
| |
| |
RB1-6616-020CN |
Left fusing assembly lock - Locks fuser |
| |
|
in place |
| |
| |
RB1-7746-000CN |
Tray shipping lock clip - Secures paper |
| |
|
tray during shipping |
| |
| Mailbox |
C4783-60101 |
7-bin table top mailbox - Whole unit |
| |
| |
C4787-69506 |
5-bin mailbox - Used when stapler option |
| |
|
is present |
| |
| |
C4787A |
5-bin mail box with stapler - Holds 2100 |
| |
|
sheets of paper used with 5Si family, |
| |
|
Mopier and 8000 printers |
| |
| Maintenance Kit |
C3914-67906 |
Maintenance kit (120V) - Replacement |
| |
|
parts after 350K pages includes, fusing |
| |
|
assembly, eight feed/separation rollers, |
| |
|
and transfer roller - NOTE: Pickup |
| |
|
rollers are not included in this kit - |
| |
|
Please order separately if needed |
| |
| |
C3914-69004 |
Maintenance kit (120V) - Replacement |
| |
|
parts after 350K pages includes, fusing |
| |
|
assembly, eight feed/separation rollers, |
| |
|
and transfer roller - NOTE: Pickup |
| |
|
rollers are not included in this kit - |
| |
|
Please order separately if needed |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = C3914-67906) |
| |
| |
C3915-67906 |
Maintenance kit (220V) - Replacement |
| |
|
parts after 350K pages includes, fusing |
| |
|
assembly, eight feed/separation rollers, |
| |
|
and transfer roller - NOTE: Pickup |
| |
|
rollers are not included in this kit - |
| |
|
Please order separately if needed |
| |
| |
C3915-69004 |
Maintenance kit (220V) - Replacement |
| |
|
parts after 350K pages includes, fusing |
| |
|
assembly, eight feed/separation rollers, |
| |
|
and transfer roller - NOTE: Pickup |
| |
|
rollers are not included in this kit - |
| |
|
Please order separately if needed |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = C3915-67906) |
| |
| |
C4265-67905 |
Paper Input Unit (PIU) maintenance kit - |
| |
|
Contains second pass roller, four spring |
| |
|
rollers and instruction sheet - For Tray |
| |
|
3 PIU |
| |
| Manual Kit |
5021-0377 |
HP-GL/2, PCL5 and PJL technical reference |
| |
|
manual kit - HP-GL/2,PCL5 and PJL |
| |
|
Technical Reference Manual Kit - Bundle |
| |
|
includes PCL and PJL manuals, PCL pocket |
| |
|
guide, PCL5 printer comparison guide and |
| |
|
PCL5 color tech reference manual |
| |
| |
C4214-99021 |
LaserJet 8100 service manual bundle - |
| |
|
Includes service manual supplement for |
| |
|
paper-handling accessories |
| |
| Manual/Software |
C4214-60103 |
LaserJet 8100 series user guide - 23 |
| |
|
languages |
| |
| Memory (DIMM) |
C7842-67901 |
8MB, 100-pin SDRAM DIMM memory module |
| |
| |
C7843-67901 |
16MB, 100-pin SDRAM DIMM memory module |
| |
| |
C7845-67901 |
32MB, 100-pin SDRAM DIMM memory module |
| |
| |
C7846-67901 |
64MB SDRAM - 100MHz synchronous DRAM - |
| |
|
DIMM package |
| |
| Memory (Product) |
C4135A |
4MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM |
| |
|
memory module |
| |
| |
C4136A |
8MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM |
| |
|
memory module |
| |
| |
C4137A |
16MB, 100-pin, 32-bit, 60nS, EDO DRAM |
| |
|
DIMM memory module |
| |
| |
C4140A |
4MB, 100-pin SDRAM DIMM memory module |
| |
| |
C4286A |
2MB flash DIMM memory - Font storage |
| |
|
device |
| |
| |
C4287A |
4MB flash DIMM memory - Font storage |
| |
|
device |
| |
| |
C7842A |
8MB, 100-pin SDRAM DIMM memory module |
| |
| |
C7843A |
16MB, 100-pin SDRAM DIMM memory module |
| |
| |
C7845A |
32MB, 100-pin SDRAM DIMM memory module |
| |
| |
Q1887A |
64MB, 100-pin SDRAM DIMM memory module |
| |
| Module |
C4781-60500 |
AC power box - Holds AC recptacle, fuse |
| |
|
holder, and four cable connections - |
| |
|
Includes mounting clips |
| |
| Motor |
C3764-60507 |
Elevator stepper motor - Moves the |
| |
|
delivery head assembly into position - |
| |
|
Mounted in upper back side of multi-bin |
| |
|
mailbox |
| |
| |
C4785-60518 |
Transport belt motor - Includes fan |
| |
| |
RF1-4003-000CN |
Reversing mechanism motor |
| |
| |
RH7-1350-000CN |
Paper input motor - Drives rollers to |
| |
|
pickup and feed paper from lower paper |
| |
|
trays |
| |
| |
RH7-5219-000CN |
Main motor - Mounted on rear of chassis |
| |
| Overlay |
C4214-40029 |
LaserJet 8100 control panel overlay |
| |
|
(English) |
| |
| |
C4214-40031 |
LaserJet 8100 control panel overlay |
| |
|
(Italian) |
| |
| |
C4214-40042 |
LaserJet 8100 control panel overlay |
| |
|
(Spanish) |
| |
| PC Board |
C4107-69001 |
Formatter board - Main logic PCA |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = C4107-67901) |
| |
| |
C4214-69009 |
DC controller board assembly |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = RG5-4375-030CN) |
| |
| |
C4785-60514 |
Diagnostic LED display board - With cable |
| |
| |
C4785-60539 |
Mailbox contoller PCA - Mailbox Contoller |
| |
|
PCA - Located at Bottom of Stacker |
| |
| |
C4787-60514 |
Stapling unit control board - Stapling |
| |
|
Unit Control Board - Mounted Behind Back |
| |
|
Plate |
| |
| |
RB2-3667-000CN |
Holder size PCA - Holder Size PCA - |
| |
| |
RG1-3814-000CN |
Bin full and interlock sensor board |
| |
| |
RG1-3815-000CN |
Sensor PCA - Empty bin sensor board |
| |
| |
RG1-3816-000CN |
Face-up bin full & sensor PCA |
| |
| |
RG1-3817-000CN |
LED PCA - Status panel LED display board |
| |
| |
RG1-3853-060CN |
Controller board - 7-bin tabletop mailbox |
| |
|
controller PCA |
| |
| |
RG5-1845-000CN |
Paper size sensor board - Used to sense |
| |
|
paper size in upper and lower paper trays |
| |
|
paper size Sensor Board - Used to Sense |
| |
|
Paper Size in Tray |
| |
| |
RG5-1846-000CN |
Switch/sensor board - Includes face down |
| |
|
tray sensors, fusing delivery sensor and |
| |
|
door switch - Switch/Sensor Board - |
| |
|
Includes Face Down Tray Sensors and, |
| |
|
Fusing Delivery Sensor |
| |
| |
RG5-1860-000CN |
Paper pickup board - Includes 8 |
| |
|
photosensors - Paper Pickup Board - |
| |
|
Includes 8 Photosensors - Mounted to Side |
| |
|
of Paper Pickup Assembly |
| |
| |
RG5-1884-000CN |
Multipurpose paper tray board - Includes |
| |
|
paper sensors PS1301 and PS1302 - |
| |
|
Multipurpose Paper Tray Board - Mounted |
| |
|
to Right Side of Pickup Assembly - |
| |
|
Includes paper sensors PS1301 and PS1302 |
| |
| |
RG5-2166-000CN |
Sensor PCA - Paper quantity sensor PCA |
| |
| |
RG5-2168-000CN |
Sensor PCA - Paper size sensor PCA |
| |
| |
RG5-3908-000CN |
Paper deck PCA - Input tray controller |
| |
|
PCA |
| |
| |
RG5-4441-000CN |
Front LED PCA - LED status display board |
| |
| |
RG5-4442-030CN |
Controller PCA - 2 x 500-SHEET input tray |
| |
|
controller PCA |
| |
| PC Board (Interface) |
J3111-69001 |
JetDirect 600N EIO internal print server |
| |
|
10Base-T, 10BASE-2, and LocalTalk LAN |
| |
|
interface board - Has one RJ-45, BNC, and |
| |
|
8-pin DIN connector - (J3111A) - NOTE: |
| |
|
EIO interface boards are NOT |
| |
|
interchangeable with MIO boards |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = J3111-61001) |
| |
| |
J3112-69001 |
JetDirect 600N EIO internal print server |
| |
|
token ring LAN interface board - Has one |
| |
|
RJ-45 and DB-9 connector - JetDirect 600N |
| |
|
EIO Internal Print Server (Token Ring) |
| |
|
LAN Interface Board - Has One RJ-45 and |
| |
|
DB-9 Connectors (J3112A) - NOTE: EIO |
| |
|
Boards are NOT |
| |
| |
J4135-61001 |
JetDirect connectivity card - Has one USB |
| |
|
port, one serial (DB9) port, and one |
| |
|
LocalTalk port - Plugs in one of the EIO |
| |
|
Slots on selected DesignJet and LaserJet |
| |
|
printers (Part of J4135A) |
| |
| |
J6057-69001 |
JetDirect 615N internal print server LAN |
| |
|
interface board - 10Base-T and 100Base-TX |
| |
|
Plugs into peripheral EIO slot, has |
| |
|
RJ-45 connector - (J3110A) - NOTE: EIO |
| |
|
interface boards are NOT interchangeable |
| |
|
with MIO boards |
| |
| |
J7934-61001 |
JetDirect 620n internal print server - |
| |
|
10BaseT and 100BaseTX LAN interface board |
| |
|
Plugs into peripheral EIO slot - has an |
| |
|
RJ-45 connector - (Part of J7934A) |
| |
| Pad |
RF5-2703-000CN |
Separation pad - Tray 1 separation pad |
| |
| Pickup Assembly |
C4214-69017 |
Paper pickup assembly - Includes pickup, |
| |
|
feed and separation rollers - Picks up |
| |
|
paper from upper and lower paper trays |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = RG5-4334-260CN) |
| |
| |
C4780-69505 |
Paper pickup - Moves paper from trays to |
| |
|
feeder assembly |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = RG5-4410-090CN) |
| |
| |
C4781-69505 |
2000 sheet paper tray paper pickup |
| |
|
assembly - Not compatible with C3763A |
| |
|
Input Tray - Mounted in upper right side |
| |
|
of chassis |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = RG5-3843-000CN) |
| |
| |
RG5-3843-000CN |
2000 sheet paper tray paper pickup |
| |
|
assembly - Not compatible with C3763A and |
| |
|
C3773A Input Tray |
| |
| |
RG5-4330-000CN |
Paper pickup assembly - For |
| |
|
multipurpose/tray one paper input |
| |
| Pin |
RA2-2439-000CN |
Positioning pin - Keeps right cover |
| |
|
positioned correctly |
| |
| |
RF5-2556-000CN |
Positioning pin - Metal locating pins - |
| |
|
Set of three - Maintains proper alignment |
| |
|
of printer and optional paper feeder |
| |
| Plate |
C3766-60505 |
Stapling Unit Back Plate - Covers rear of |
| |
|
Stapling Unit |
| |
| |
RA2-2500-000CN |
Support plate - Supports empty bin sensor |
| |
|
PCA |
| |
| |
RA2-2527-000CN |
Stopper plate - Limits travel of right |
| |
|
cover |
| |
| |
RA2-2541-000CN |
Motor cover - Reversing mechanism motor |
| |
|
cover plate |
| |
| |
RB1-6582-020CN |
Upper paper guide plate |
| |
| |
RB1-6894-000CN |
Paper cassette size plate - Self adhesive |
| |
|
label NOT included |
| |
| |
RF1-4005-000CN |
Latch plate |
| |
| |
RF5-1464-000CN |
Switch/sensor board plate - Shields |
| |
|
switch/sensor PCA |
| |
| |
RG5-3849-000CN |
Middle paper limit plate - Middle Paper |
| |
|
Limit Plate - |
| |
| |
RG5-3850-000CN |
Front paper reference plate - Front paper |
| |
|
limit plate for 2000 sheet feeder |
| |
| |
RG5-4201-000CN |
Rear paper limit plate - Back paper limit |
| |
|
plate for 2000 sheet feeder |
| |
| Power Cord |
8120-6798 |
Power cord (Flint Gray) - 18 AWG, 2.3m |
| |
|
(7.5ft) long - Has straight (F) C13 |
| |
|
receptacle (For 100VAC in Japan) |
| |
| |
8120-6809 |
Power cord (Dove Gray) - 2.3m (7.5ft) |
| |
|
long - Has straight (F) receptacle (for |
| |
|
240V in the United Kingdom, Hong Kong, |
| |
|
Singapore, Malaysia) |
| |
| |
8120-6810 |
Power cord (Flint Gray) - 2.3m (7.5ft) |
| |
|
long - Has straight (F) C13 receptacle |
| |
|
(for 240V in Australia and New Zealand) |
| |
| |
8120-6811 |
Power cord (Flint Gray) - 17 AWG, 2.3m |
| |
|
(7.5ft) long - Has straight (F) C13 |
| |
|
receptacle (for 220V in Europe, Saudi |
| |
|
Arabia, South Africa, India, and Korea) |
| |
| |
8120-6812 |
Power cord (Flint Gray) - 18 AWG, 2.3m |
| |
|
(7.5ft) long - Has straight (F) |
| |
|
receptacle (for 120V in the USA, Canada, |
| |
|
Mexico, Philippines, and Taiwan) |
| |
| |
8120-6813 |
Power cord (Flint Gray) - 17 AWG, 2.3m |
| |
|
(7.5ft) long - Has straight (F) |
| |
|
receptacle (for 220V in South Africa, |
| |
|
Saudi Arabia, and India) |
| |
| |
8120-6815 |
Power cord (Flint Gray) - 17 AWG, 2.3m |
| |
|
(7.5ft) long - Has straight (F) |
| |
|
receptacle (for 220V in Switzerland) |
| |
| |
C4781-60501 |
Daisy chain' power cord - Has (M) C14 |
| |
|
plug for power input and (F) C13 plug for |
| |
|
power output - 250VAC, 10A - 71.5cm |
| |
|
(28.1in) long - Short Jumper Cable - From |
| |
|
C4780/81A Power Box to Printer |
| |
| |
C4781-60502 |
Daisy chain' power cord - 18 AWG - Has |
| |
|
C14 (M) plug for power input and C13 (F) |
| |
|
plug for power output - 250VAC, 10A - |
| |
|
2.6m (8.4ft) long - Long Jumper Cable - |
| |
|
From Power Box to Input Device |
| |
| |
RH2-5263-000CN |
Power cord (Gray) - 14 AWG, 2.3m (7.5ft) |
| |
|
long - Has straight (F) receptacle (For |
| |
|
120V in the USA and Canada) |
| |
| Power Supply |
C4265-69006 |
Low voltage power supply (120v,60Hz) - |
| |
|
Includes power switch, AC receptacle and |
| |
|
DC power supply |
| |
|
REQUIRES RETURN OF DEFECTIVE PART |
| |
|
(New part = RG5-4357-040CN) |
| |
| |
RG5-4021-000CN |
Universal power supply |
| |
| |
RG5-4301-040CN |
Low voltage power supply - 240VAC, 50Hz - |
| |
|
Includes power switch, AC receptacle and |
| |
|
DC power supply |
| |
| |
RG5-4306-050CN |
High voltage power supply assembly |
| |
| |
RH3-2205-000CN |
Power supply PCA for 7-bin tabletop |
| |
|
mailbox power supply |
| |
| Power Supply Kit |
C4789A |
Power supply kit - For connecting a |
| |
|
multi-bin mailbox to printer when printer |
| |
|
is on a stand - Included with C4780A (two |
| |
|
X 500 sheet input tray) and C4781A (2000 |
| |
|
sheet input tray) |
| |
| Rail |
RB1-6777-000CN |
Right side tray rail - Channel that |
| |
|
attaches to metal frame for tray two and |
| |
|
three support |
| |
| Rod |
RB1-6778-000CN |
Rod - Tray connector rod for springs |
| |
| Roller |
RB1-9526-000CN |
Pickup roller - Used in tray 1 paper |
| |
|
pickup assembly |
| |
| |
RB2-3562-000CN |
Fuser pressure roller - Roller that |
| |
|
provides pressure against heating roller |
| |
|
in fuser asssembly |
| |
| |
RB2-3851-000CN |
Torque limiter - Limits rotation of feed |
| |
|
rollers - Black and gray D-shaped roller |
| |
| |
RF5-1834-000CN |
Feed/separation roller - Has a blue gear |
| |
|
on one end and blue release tab on the |
| |
|
other - Mounts in the paper input unit |
| |
|
assembly (four used) |
| |
| |
RF5-1835-000CN |
Pickup roller assembly - Has attached |
| |
|
Black plastic gear - Mounts in the 2000 |
| |
|
sheet paper tray |
| |
| |
RF5-2708-000CN |
Pickup roller - Used in paper pickup |
| |
|
assembly - 2 used |
| |
| |
RF9-1394-020CN |
Transfer roller - Transfer charge roller |
| |
|
(Black) |
| |
| |
RG9-1361-020CN |
Transfer roller assembly - Includes |
| |
|
transfer guide, both transfer bushings |
| |
|
and transfer roller |
| |
| Roller Assembly |
RG5-4303-030CN |
Registration assembly - Set of rollers |
| |
|
before toner cartridge and after feed |
| |
|
rollers - Has green handle with the |
| |
|
number 2 printed on it |
| |
| Roller Kit |
H3977-60001 |
Paper path roller kit - Contains four |
| |
|
feed/separation rollers and 2 pickup |
| |
|
rollers used in Paper Input Assembly - |
| |
|
Also has MP/Tray1 pickup roller - |
| |
|
Procedure requires service manual |
| |
| Sensor |
RH7-7105-000CN |
Surface temperature sensor - Fuser |
| |
|
temperature sensor on opposite side of |
| |
|
gear assembly of fusing assembly |
| |
| |
RY7-5080-000CN |
Photo sensor kit - Includes photo sensors |
| |
|
PS 1,3,5 and 6 - Photo sensor - For paper |
| |
|
registration or paper pickup sensor - Two |
| |
|
used |
| |
| |
WG8-0291-000CN |
Photo sensor - Photo sensor - For paper |
| |
|
registration or paper pickup sensor - Two |
| |
|
used |
| |
| Shield |
RB1-6749-000CN |
Internal cover for Tray 1 pickup assembly |
| |
| |
RF5-2678-000CN |
Formatter board EMI shield - EMI shield - |
| |
|
Formatter Board EMI protective cover |
| |
| Shipping Material/Car |
tonC4785-60513 |
Repackaging kit |
| |
| Software |
C6072-60301 |
HP-GL/2 driver software for AutoCAD - For |
| |
|
DOS and Windows 3.1/95/NT 4.0 - On |
| |
|
3.5-inch 1.44MB floppy disks (English) |
| |
| |
C6072-60305 |
HP-GL/2 driver software for AutoCAD - For |
| |
|
DOS and Windows 3.1/95/NT 4.0 - On |
| |
|
3.5-inch 1.44MB floppy disks (French) |
| |
| |
C6072-60306 |
HP-GL/2 driver software for AutoCAD - For |
| |
|
DOS and Windows 3.1/95/NT 4.0 - On |
| |
|
3.5-inch 1.44MB floppy disks (Spanish) |
| |
| |
C6072-60307 |
HP-GL/2 driver software for AutoCAD - For |
| |
|
DOS and Windows 3.1/95/NT 4.0 - On |
| |
|
3.5-inch 1.44MB floppy disks (Italian) |
| |
| Solenoid |
RF1-3998-000CN |
Flipper solenoid |
| |
| |
RG5-1875-000CN |
Face Up solenoid assembly - Face Up |
| |
|
solenoid assembly - Mounted to rear of |
| |
|
chassis |
| |
| |
RH7-5223-000CN |
Reversing mechanism solenoid |
| |
| Spacer |
RB2-3705-000CN |
Latch spacer - Black plastic piece that |
| |
|
latch engages |
| |
| Spring |
RA2-2513-000CN |
Tension spring - Provides tension for |
| |
|
latch handle |
| |
| |
RB1-6409-000CN |
Sensor arm spring - Holds tension on |
| |
|
paper feeder sensor arm |
| |
| |
RB1-6493-000CN |
Compression spring - Center support for |
| |
|
left output bin |
| |
| |
RB1-6509-000CN |
Torsion spring - Helps support left |
| |
|
output bin tray |
| |
| |
RB1-6558-020CN |
Sensor arm torsion spring - Holds tension |
| |
|
on PIU paper sensor arm |
| |
| |
RB1-7835-000CN |
Leaf spring - Retaining spring |
| |
| |
RS5-2499-000CN |
Tension spring - Front spring on metal |
| |
|
slide |
| |
| |
RS5-2561-000CN |
Tension spring |
| |
| |
RS6-2072-000CN |
Compression spring - Holds tension on |
Login Here
