LaserJet 4/4 Plus/5 Fuser Installation Instructions
|
|
|
LaserJet
4/4 Plus/5 Series Fuser Installation Instructions |
| |
Models:
4 | 4m | 4 Plus | 4m Plus | 5
| 5m | 5n
NOTE: These instructions are simply
a guide. First Choice assumes no responsibility or
liability for any damages caused by user while working
on there printer during this repair. |
|
|
|
Tools Required |
•
#2 Phillips Screwdriver |
|
|
| Step
1 |
NOTE: Unplug the Printer before removing Fuser and let
it cool the Fusing Assembly is hot and can burn
you.
Turn the Printer around so you are facing the rear
of the Printer at this time open the Rear Door of
the Printer and identify the Fuser and remove the
(2) two Screws holding it in. |
|
|
| Step
2 |
Simply apply a little
lift to the Fuser and pull straight toward yourself
the Fuser is easily to be removed, after the Fuser
is removed it is a good time to clean this area
in the Printer with a lightly Dampened Rag or Paper
Towel. |
|
|
