LaserJet 4/4 Plus/5 Series Pick-Up Rollers & Separation Pad Installation Instructions   Models: 4 | 4m | 4 Plus | 4m Plus | 5 | 5m | 5n NOTE: These instructions are simply a guide. First Choice assumes no responsibility or liability for any damages caused by user while working on there printer during this repair.

	Tools Required • Small Flat Blade Screwdriver
	Step 1 Remove the Tray 1 or (MP Tray) Cover Plate, this can be accomplished by pinching the top center of the Plastic Black Cover and pulling toward yourself.
	Step 2 Identify and remove the Tray 1 Roller, simply pinch the Lock Clip while you slide the Roller to the right off the Shaft.
	Step 3 Identify the Small Separation Pad and remove it by sliding a Small Flat Blade Screwdriver under it and gently pry upwards, the Pad will come off. When reinstalling your Separation Pad simply rest the Pad on top of the Pad holder and push down it will snap in to place. (Be Gentle)
	Step 4 Remove the Paper Tray for installing the Tray 2 Paper Pick-Up Roller. Identify the Tray 2 Pick-Up Roller, you may have to angle your Printer up a little in the front to see clearly, simply look up and in on the left and you will see the Roller, simply pinch and slide the Roller to the right for removal. When reinstalling your Roller simply push the Roller on the Shaft, you may have to rotate the Roller until it snaps into place.