Skew
| Laser
printer print defects - Skew |
|
| Problem
|
Cause
|
Solution
|
How
common* |
Comments |
| skew |
Print media
does not meet printer specifications or is stored improperly |
1. Print a
few more pages to see if the problem corrects itself. 2. Verify that there
are no torn pieces of media inside the printer. 3. Turn over the stack of
media in the tray. Also try rotating the media 180 degrees. 4. If the print media
does not meet HP specifications, replace the paper, and advise the customer
to use the recommended print media and store it properly. |
3 |
|
| skew |
Print media
is not loaded correctly or trays are not adjusted properly |
Make sure
print media is loaded correctly and that the guides fit properly against
the media stack. |
5 |
|
| skew |
Registration
assembly and/or scanner assemble are improperly installed. |
Be sure that
the registration assembly an scanner assemble are installed correctly. |
5 |
|
| *On
a scale of 1-10, how often this problem occurs (10 being most likely). |
|
